inductors military, mil-prf-15305 q ualified, type lt, molded ms7508x, ms18130, MS14046, ms90538, ms75101 vishay dale www.vishay.com for technical questi ons contact magnetics@vishay.com document number: 34189 8 revision: 16-mar-06 features ? wide inductance range in small package ? flame retardant coating ? precision performance, excellent reliability, sturdy construction ? epoxy molded construction provides superior moisture protection electrical specifications inductance tolerance: 10 %, standard insulation resistance: 1000 megohm minimum per mil-std-202, method 302, test condition b dielectric strength: per mil-std-202, method 301: 1000 vac mechanical specifications terminal strength: per mil-std-202, method 211, test condition a: 5 pounds pull and twist weight: ms75083 = 0.30 gram maximum ms75084 = 0.30 gram maximum ms75085 = 0.30 gram maximum ms18130 = 0.65 gram maximum MS14046 = 0.65 gram maximum ms90538 = 0.65 gram maximum ms75101 = 0.95 gram maximum material specifications encapsulant: epoxy standard terminal: ms75083, ms75084, ms75085, 24 awg; ms18130, MS14046, ms90538, ms75101, 22 awg; tinned copper test equipment* ? h/p 4342a q-meter ? measurements corporation megacycle meter, model 59 ? wheatstone bridge * test procedures per mil-prf-15305 inductance range and military military standard inductance range mil. range in bold face classification from to grade class ms75083 0.10 h 1 h 1b ms75084 1.2 h 27 h 1a ms75085 33 h 1000 h 1a ms18130 0.15 h 4.7 h 1b MS14046 5.6 h 33 h 1a ms90538 36 h 240 h 1a ms75101 3.3 h 27 h 1a dimensions in inches [millimeters] model a (dia.) b c (typ.) d (dia.) ms75083 max. 0.105 [2.67] 0.260 [6.60] 1.63 [41.40] 0.0215 [0.546] min. 0.085 [2.16] 0.240 [6.10] 1.25 [31.75] 0.0185 [0.470] ms75084 max. 0.105 [2.67] 0.260 [6.60] 1.63 [41.40] 0.0215 [0.546] min. 0.085 [2.16] 0.240 [6.10] 1.25 [31.75] 0.0185 [0.470] ms75085 max. 0.105 [2.67] 0.260 [6.60] 1.63 [41.40] 0.0215 [0.546] min. 0.085 [2.16] 0.240 [6.10] 1.25 [31.75] 0.0185 [0.470] ms83130 max. 0.165 [4.19] 0.385 [9.78] 1.63 [41.40] 0.027 [0.686] min. 0.145 [3.68] 0.365 [9.27] 1.25 [31.75] 0.023 [0.584] MS14046 max. 0.165 [4.19] 0.385 [9.78] 1.63 [41.40] 0.027 [0.686] min. 0.145 [3.68] 0.365 [9.27] 1.25 [31.75] 0.023 [0.584] ms90538 max. 0.165 [4.19] 0.385 [9.78] 1.63 [41.40] 0.027 [0.686] min. 0.145 [3.68] 0.365 [9.27] 1.25 [31.75] 0.023 [0.584] ms75101 max. 0.200 [5.08] 0.450 [11.43] 1.63 [41.40] 0.027 [0.686] min. 0.180 [4.57] 0.430 [10.92] 1.25 [31.75] 0.023 [0.584] b c ty p. a dia. d dia. environmental performance test conditions specifications barometric pressure test condition c mil-std-202, method 105 thermal shock test condition a-1 mil-std-202, method 107 flammability - mil-std-202, method 111 overload - mil-prf-15305 low temperature storage - mil-prf-15305 resistance to soldering heat test condition a mil-std-202, method 210 resistance to solvents - mil-std-202, method 215
ms7508x, ms18130, MS14046, ms90538, ms75101 inductors, military, mil-prf-15305 qualified, type lt, molded vishay dale document number: 34189 for technical questions contact ma gnetics@vishay.com www.vishay.com revision: 16-mar-06 9 * measured with full length lead. ** rated dc current based on the maximum temperatur e rise as shown in table. standard electrical specifications model ind (h) tol. military standard military type q min. test freq. l & q (mhz) self- resonant* freq min. (mhz) dcr max. (ohms) rated** dc current (ma) lt 4 k phenolic core ms75083 0.10 10 % - 1 339 40 25.0 680.0 0.08 1350 0.12 10 % - 2 340 40 25.0 640.0 0.09 1270 0.15 10 % - 3 341 38 25.0 600.0 0.10 1200 0.18 10 % - 4 342 35 25.0 550.0 0.12 1105 0.22 10 % - 5 343 33 25.0 510.0 0.14 1025 0.27 10 % - 6 344 33 25.0 430.0 0.16 960 0.33 10 % - 7 345 30 25.0 410.0 0.22 815 0.39 10 % - 8 346 30 25.0 365.0 0.30 700 0.47 10 % - 9 347 30 25.0 330.0 0.35 650 0.56 10 % - 10 348 30 25.0 300.0 0.50 545 0.68 10 % - 11 349 28 25.0 275.0 0.60 495 0.82 10 % - 12 350 28 25.0 250.0 0.85 415 1.0 10 % - 13 351 25 25.0 230.0 1.0 385 lt10k iron core ms75084 1.2 10 % - 1 061 25 7.9 150.0 0.18 590 1.5 10 % - 2 062 28 7.9 140.0 0.22 535 1.8 10 % - 3 063 30 7.9 125.0 0.30 455 2.2 10 % - 4 064 30 7.9 115.0 0.40 395 2.7 10 % - 5 065 37 7.9 100.0 0.55 355 3.3 10 % - 6 066 45 7.9 90.0 0.85 270 3.9 10 % - 7 067 45 7.9 80.0 1.0 250 4.7 10 % - 8 068 45 7.9 75.0 1.2 230 5.6 10 % - 9 069 50 7.9 65.0 1.8 185 6.8 10 % - 10 070 50 7.9 60.0 2.0 175 8.2 10 % - 11 071 55 7.9 55.0 2.7 155 10.0 10 % - 12 072 55 7.9 50.0 3.7 130 12.0 10 % - 13 073 45 2.5 40.0 2.7 155 15.0 10 % - 14 074 40 2.5 35.0 2.8 150 18.0 10 % - 15 075 50 2.5 30.0 3.1 145 22.0 10 % - 16 076 50 2.5 25.0 3.3 140 27.0 10 % - 17 077 50 2.5 20.0 3.5 135 lt10k ferrite core ms75085 33.0 10 % - 1 078 45 2.5 24.0 3.4 130 39.0 10 % - 2 079 45 2.5 22.0 3.6 125 47.0 10 % - 3 080 45 2.5 20.0 4.5 110 56.0 10 % - 4 081 45 2.5 18.0 5.7 100 68.0 10 % - 5 082 50 2.5 15.0 6.7 92 82.0 10 % - 6 083 50 2.5 14.0 7.3 88 100.0 10 % - 7 084 50 2.5 13.0 8.0 84 120.0 10 % - 8 085 30 0.79 12.0 13.0 66 150.0 10 % - 9 086 30 0.79 11.0 15.0 61 180.0 10 % - 10 087 30 0.79 10.0 17.0 57 220.0 10 % - 11 088 30 0.79 9.0 21.0 52 270.0 10 % - 12 089 30 0.79 8.0 25.0 47 330.0 10 % - 13 090 30 0.79 7.0 28.0 45 390.0 10 % - 14 091 30 0.79 6.5 35.0 40 470.0 10 % - 15 092 30 0.79 6.0 42.0 36 560.0 10 % - 16 093 30 0.79 5.0 46.0 35 680.0 10 % - 17 094 30 0.79 4.0 60.0 30 820.0 10 % - 18 095 30 0.79 3.8 65.0 29 1000.0 10 % - 19 096 30 0.79 3.4 72.0 28 lt 4 k phenolic core ms18130 0.15 20 % - 1 074 50 25.0 525.0 0.03 2450 0.22 20 % - 2 075 50 25.0 450.0 0.055 1810 0.33 20 % - 3 076 45 25.0 360.0 0.09 1400 0.47 20 % - 4 077 45 25.0 310.0 0.12 1225 0.56 10 % - 5 078 50 25.0 280.0 0.135 1150 0.68 10 % - 6 079 50 25.0 250.0 0.15 1100 0.82 10 % - 7 080 50 25.0 220.0 0.22 900 1.0 10 % - 8 081 50 25.0 200.0 0.29 785 1.2 10 % - 9 082 33 7.9 180.0 0.42 650 1.5 10 % - 10 083 33 7.9 160.0 0.50 600 1.8 10 % - 11 084 33 7.9 150.0 0.65 525 2.2 10 % - 12 085 33 7.9 135.0 0.95 435 2.7 10 % - 13 086 33 7.9 120.0 1.20 385 3.3 10 % - 14 087 33 7.9 110.0 2.0 300 3.9 10 % - 15 088 33 7.9 100.0 2.30 280 4.7 10 % - 16 089 33 7.9 90.0 2.60 260
ms7508x, ms18130, MS14046, ms90538, ms75101 vishay dale inductors, military, mil-prf-15305 qualified, type lt, molded www.vishay.com for technical questi ons contact magnetics@vishay.com document number: 34189 10 revision: 16-mar-06 * measured with full length lead. ** rated dc current bas ed on the maximum temperature rise as shown in table standard electrical specifications model ind (h) tol. military standard military type q min. test freq. l & q (mhz) self- resonant* freq min. (mhz) dcr max. (ohms) rated** dc current (ma) lt10k iron core MS14046 5.6 10 % -1 128 45 7.9 60.0 0.32 495 6.8 10 % -2 129 50 7.9 55.0 0.50 395 8.2 10 % -3 130 50 7.9 50.0 0.60 360 10.0 10 % -4 131 55 7.9 45.0 0.90 290 12.0 10 % -5 132 65 2.5 42.0 1.10 265 15.0 10 % -6 133 65 2.5 40.0 1.40 240 18.0 10 % -7 134 75 2.5 34.0 2.25 185 22.0 10 % -8 135 75 2.5 30.0 2.50 175 27.0 10 % -9 136 60 2.5 25.0 2.60 170 33.0 10 % -10 137 65 2.5 19.0 3.00 165 lt10k iron core ms90538 36.0 5 % -1 001 60 2.5 15.5 2.50 180 39.0 5 % -2 002 60 2.5 14.5 2.60 176 43.0 5 % -3 003 60 2.5 13.7 2.70 172 47.0 5 % -4 004 55 2.5 13.0 2.75 170 51.0 5 % -5 005 55 2.5 12.7 2.85 167 56.0 5 % -6 006 55 2.5 12.0 3.00 164 62.0 5 % -7 007 55 2.5 11.5 3.15 160 68.0 5 % -8 008 55 2.5 11.0 3.30 156 75.0 5 % -9 009 55 2.5 10.5 3.70 147 82.0 5 % -10 010 50 2.5 10.3 3.90 143 91.0 5 % -11 011 50 2.5 10.0 4.30 136 100.0 5 % -12 012 50 2.5 9.5 4.50 133 110.0 5 % -13 013 60 0.79 8.9 4.90 128 120.0 5 % -14 014 65 0.79 8.7 5.20 124 130.0 5 % -15 015 65 0.79 8.5 5.45 121 150.0 5 % -16 016 65 0.79 8.0 6.05 114 160.0 5 % -17 017 65 0.79 7.5 6.40 111 180.0 5 % -18 018 65 0.79 7.0 6.75 108 200.0 5 % -19 019 65 0.79 6.5 7.10 106 220.0 5 % -20 020 65 0.79 6.2 7.45 103 240.0 5 % -21 021 65 0.79 5.9 7.80 101 lt10k lt10k iron core ms75101 3.3 10 % -01 169 30 7.9 70.0 0.140 990 3.9 10 % -02 170 30 7.9 65.0 0.155 870 4.7 10 % -03 171 30 7.9 60.0 0.210 745 5.6 10 % -04 172 30 7.9 50.0 0.280 645 6.8 10 % -05 173 30 7.9 50.0 0.375 560 8.2 10 % -06 174 30 7.9 48.0 0.440 540 10.0 10 % -07 175 30 7.9 42.0 0.605 440 12.0 10 % -08 176 50 2.5 36.0 1.05 370 15.0 10 % -09 177 55 2.5 30.0 1.20 310 18.0 10 % -10 178 60 2.5 30.0 1.95 255 22.0 10 % -11 179 60 2.5 24.0 2.20 240 27.0 10 % -12 180 65 2.5 22.0 2.75 205 maximum temperature rise operating temperature range ms75083 0.10 h to 1.0 h = 35 c at + 90 c ambient - 55 c to + 125 c ms75084 1.2 h to 27 h = 15 c at + 90 c ambient - 55 c to + 105 c ms75085 33 h to 1000 h = 15 c at + 90 c ambient - 55 c to + 105 c ms18130 0.15 h to 4.7 h = 35 c at + 90 c ambient - 55 c to + 125 c MS14046 5.6 h to 33 h = 15 c at + 90 c ambient - 55 c to + 105 c ms90538 36 h to 240 h = 15 c at + 90 c ambient - 55 c to + 105 c ms75101 3.3 h to 27 h = 15 c at + 90 c ambient - 55 c to + 105 c
ms7508x, ms18130, MS14046, ms90538, ms75101 inductors, military, mil-prf-15305 qualified, type lt, molded vishay dale document number: 34189 for technical questions contact ma gnetics@vishay.com www.vishay.com revision: 16-mar-06 11 description - military part number ms75084 - 12 or lt 10 k 072 military standard inductance value type grade and class family id number global part number information pac k ag e c o d e u r i n ducta n ce v alue -12 model 0 5 s m7 4 8
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
